Martin Body Hammers
Martin Tools makes very good American auto-body hand tools. These are based on the old patterns from Fairmont, Paramount, Proto, Blackhawk, and others. We have found this company to be responsive to the market, and they are genuine made-in-America.
We do not carry "rough-faced" hammers, either with the waffle pattern or the twisty pattern. These hammers are sold by people who do not do metalwork of any kind, and the hammers themselves just mark up the metal. If you want to learn the proper way to shrink metal using simple hand tools or machines, then we suggest you check out our How To article, “Shrinking Metal - Do’s & Don’ts” Please Note, You will not shrink sheet metal by bonking on it with a rough-faced club.
Deep Reach Dinging Hammer
For fender and high-crowned panel dinging or bumping. Both high and low-crown faces for on or off dolly work. Faces are 1 1/4" and 1 9/16" round heads, 6" overall length of hammer head. Weight 1.04 lbs. Optional High Polish Finish with wood handle only.
Dinging Hammer (Wooden Handle) |
 |
||
| MTF-150G | $37.50 | ||
Dinging Hammer (Fiberglass Handle) |
|
||
| MTF-150FG | $42.25 | ||
| |
|||
Square Face Dinging Hammer
For light dinging and long reach. Square face permits dinging close to molding or beading. Faces, 1 ¼” round, 1 1/16” square head 6” overall. Weight .85 lbs.
Square Face Dinging (Wooden Handle) |
|
||
| MTF-151G | $38.50 | ||
Square Face Dinging (Fiberglass Handle) |
|
||
| MTF-151FG | $40.00 | ||
| |
|||
Cross Chisel Hammer
Excellent for finishing. Cross peen used for working in sharp corners, around moldings and for caulking. Round face-1 9/16” diameter. Chisel-3” long. Weight .87 lbs.
Cross Chisel (Wooden Handle) |
|
||
| MTF-153G | $35.25 | ||
Cross Chisel (Fiberglass Handle) |
|
||
| MTF-153FG | $39.75 | ||
| |
|||
Curved Cross Chisel Hammer
Excellent for finishing. Cross peen used for working in sharp corners around moldings and caulking. Well balanced curved chisel for work in close places. Round face-1 9/16” diameter. Chisel-3” long. Weight .85 lbs. Optional High Polish Finish with wood handle only.
Curved Cross Chisel (Wooden Handle) |
|
||
| MTF-153GB | $38.00 | ||
Curved Cross Chisel (Fiberglass Handle) |
|
||
| MTF-153FGB | $42.75 | ||
| |
|||
Fender Bumping Hammer
For bumping where hand and dolly cannot reach. Ample clearance for obstructions. Also used as a caulking iron. Length of head, 8 ¾”. Weight 2.8 lbs.
Fender Bumping (Wooden Handle) |
|
||
| MTF-155G | $46.50 | ||
Fender Bumping (Fiberglass Handle) |
|
||
| MTF-155FG | $52.50 | ||
| |
|||
Deep Reach Pick Hammer
Long-reach, thin point for low spot on low-crown panels. Reaches over inner obstructions. One high-crown face. Face, 1 ¼” round point, 1/32” radius. Length of pointed end, 5 ½”. Weight .91 lbs.
Deep Reach Pick (Wooden Handle) |
|
||
| MTF-156G | $36.75 | ||
Deep Reach Pick (Fiberglass Handle) |
|
||
| MTF-156FG | $41.50 | ||
| |
|||
Deep Reach Curved Pick Hammer
Like 156G except pick end is bent in arc of normal blow. Reaches behind reinforcements to difficult spots. Face, 1 ¼” round point, 1/32” radius. Length of pointed end, 5 ½”. Weight .86 lbs.
Deep Reach Curved Pick (Wooden Handle) |
|
||
| MTF-156GB | $33.75 | ||
Deep Reach Curved Pick (Fiberglass Handle) |
|
||
| MTF-156FGB | $38.25 | ||
| |
|||
General Purpose Pick Hammer
Medium size point and reach for general work. Low crown strawberry point for perfect balance. Face, 1 9/16” round point, 3/32” radius. Length of pick end, 3 ¾”. Weight .91 lbs.
General Purpose Pick (Wooden Handle) |
|
||
| MTF-158G | $35.50 | ||
General Purpose Pick (Fiberglass Handle) |
|
||
| MTF-158FG | $40.25 | ||
| |
|||
Round Point Pick Finishing Hammer
Blunt point - long reach. For low spots on high crown panels and other work with long reach. Will not pick holes in the metal. Round face-1 9/16” diameter. Blunt point 3” long. Weight .81 lbs. Optional High Polish Finish with wood handle only.
Round Point Pick Finishing (Wooden Handle) |
|
||
| MTF-158GM | $36.75 | ||
Round Point Pick Finishing (Fiberglass Handle) |
|
||
| MTF-158FGM | $41.50 | ||
| |
|||
Sharp Point Pick Finishing Hammer
Sharp point - long reach. For low spots on high crown panels and other work with long reach. Round face-1 9/16” diameter. Sharp point 3” long. Weight .79 lbs.
Sharp Point Pick - Finishing (Wooden Handle) |
|
||
| MTF-158GMS | $39.75 | ||
Sharp Point Pick - Finishing (Fiberglass Handle) |
|
||
| MTF-158FGMS | $45.00 | ||
| |
|||
Heavy Duty Bumping Hammer
For heavy gauge truck fenders and panels. Also used in straightening reinforcements, braces, etc. Faces, 1 ¼” round and 1 3/16” square head, 4” overall. Weight 1.1 lbs.
Heavy Duty Bumping (Wooden Handle) |
|
||
| MTF-160G | $35.75 | ||
Heavy Duty Bumping (Fiberglass Handle) |
|
||
| MTF-160FG | $40.25 | ||
| |
|||
Light Dinging Hammer
Short-reach, lightweight. One low-crown, square face. Lightest dinging hammer in line. Faces, 1 ¼” round and 1 3/16” square. Head, 4” overall. Weight .83 lbs. Optional High Polish Finish with wood handle only.
Light Dinging (Wooden Handle) |
|
||
| MTF-161G | $35.50 | ||
Light Dinging (Fiberglass Handle) |
|
||
| MTF-161FG | $40.00 | ||
| |
|||
Utility Pick Hammer
Blunt point, short reach. For low spots in high-crown panels and other work with small clearance. Round face 1 9/16”; blunt peen point 2” long with a 5/32” radius; 4” overall head length. Optional High Polish Finish with wood handle only.
Utility Pick (Wooden Handle) |
|
||
| MTF-164G | $33.50 | ||
Utility Pick (Fiberglass Handle) |
|
||
| MTF-164FG | $38.25 | ||
| |
|||
Light Weight Pick Hammer
Lightweight. Provides stubby pick point and high-crown peen-type faces. Will ding out small dents in high fins. No need to remove panels. Long reach, 18” handle. Weight 5 oz. Short reach, 12” handle. Weight 4 oz.
Pick Hammer (18" Handle) |
|
||
| MTF-165G | $30.50 | ||
Pick Hammer (12" Handle) |
|
||
| MTF-166G | $30.50 | ||
| |
|||
Cross Peen Finishing Hammer
Used to bump odd fender or bumper contours. Round face-1 9/16” diameter peen end 3/16” x 7/8”. 5” overall head length. 12” handle. Weight .91 lbs.
Cross Peen Finishing (Wooden Handle) |
|
||
| MTF-168G | $36.75 | ||
Cross Peen Finishing (Fiberglass Handle) |
|
||
| MTF-168FG | $41.25 | ||
| |
|||
High Crown Cross Peen Hammer
Ideal for forming radiuses, contours and curves - restoration, bike tank. Round face 1 ¼” diameter; 2 ¼” high crown radius; peen 1” wide, 3/16” radius; head 4 ½” overall head length. Weight 1.0 lbs. Optional High Polish Finish with wood handle only.
High Crown Cross Peen (Wooden Handle) |
|
||
| MTF-168HC | $39.50 | ||
High Crown Cross Peen (Fiberglass Handle) |
|
||
| MTF-168HCFG | $44.25 | ||
| |
|||
Large Face Pick Finsihing Hammer
For finishing and caulking. Round face-1 7/8” diameter. 4 ½” overall head length. 13” handle. Weight 1.0 lbs.
Large Face Pick Finishing (Wooden Handle) |
|
||
| MTF-169G | $37.00 | ||
Large Face Pick Finishing (Fiberglass Handle) |
|
||
| MTF-169FG | $41.50 | ||
| |
|||
Door Skin Hammer
For high crown work and finishing, without poking holes in thin sections. 6 ½” overall length. 12” handle. Weight .94 lbs.
Door Skin (Wooden Handle) |
|
||
| MTF-170G | $52.25 | ||
Door Skin (Fiberglass Handle) |
|
||
| MTF-170FG | $57.00 | ||
| |
|||
