Other Metalworking Materials DVDs
Air Hammer Operations
This new film introduces the craftsman to the many shaping and planishing operations the Air Shaping and Planishing Hammer performs on a variety of metal alloys, thicknesses and hardnesses.
Air Hammer Operations |
 |
||
| TMV-0187-D | $20.00 | ||
7 Day Rental - DVD |
|
||
| TMV-0187-R | $9.40 | ||
| |
|||
An American's View of the English Wheel
Although simple, the wheel can be deceptively so, and this DVD solves many of the mysteries of tracking patterns, layering, shrinking, and smoothing out the rough spots.
An American's View of the English Wheel |
|
||
| TMV-0006-D | $40.00 | ||
7 Day Rental - DVD |
|
||
| TMV-0006-R | $9.40 | ||
| |
|||
Cast Iron Welding with the Torch & Arc DVD
Using traditional materials and proven, simple methods, Kent shows you a nearly perfect system to repair exhaust manifolds, pump housings, valve bodies, and some blocks.
Cast Iron Welding with the Torch & Arc |
|
||
| TMV-0012-D | $35.00 | ||
7 Day Rental - DVD |
|
||
| TMV-0012-R | $9.40 | ||
| |
|||
Edge Those Panels
Edge Those Panels with a hammer and dolly, or the edge of a workbench; many types of bends, flanges, and hems are shown, and common mistakes identified. The mysterious wired edge is covered in detail, and with simple hand tools.
Edge Those Panels |
|
||
| TMV-0005-D | $40.00 | ||
7 Day Rental - DVD |
|
||
| TMV-0005-R | $9.40 | ||
| |
|||
Eyes of Flight
If you want to learn how to handle, cut, drill, form and care for Plexiglas, then this is the film!
Eyes of Flight |
|
||
| HTV-0018-D | $65.00 | ||
7 Day Rental |
|
||
| HTV-0018-R | $6.40 | ||
| |
|||
Fluid Forming Compound Shapes in Aluminum Parts
Use water pressure and a cavity to form sheetmetal parts, with either city water pressure or an inexpensive high-pressure pump. We show you how to make aluminum shapes that are smooth and free of marks. Other types of sheetmetal can certainly be "inflated" into some interesting shapes.
Fluid Forming Compound Shapes in Aluminum Parts |
|
||
| TMV-0007-D | $35.00 | ||
7 Day Rental - DVD |
|
||
| TMV-0007-R | $9.40 | ||
| |
|||
Shaping Aluminum Wheel Pants
With seven simple hand tools (including the torch), a set of wheel pants or other similar panels can be constructed. This tape starts with alloy, temper, and thickness applications, and goes into buck development from drawings
Shaping Aluminum Wheel Pants |
|
||
| TMV-0002-D | $40.00 | ||
7 Day Rental - DVD |
|
||
| TMV-0002-R | $9.40 | ||
| |
|||
Shrinking Magic
Use, tune up, and modification to the Lancaster shrinking machines are demonstrated in depth in the first part, and then the use of form blocks is covered in detail, handworking inside and outside curved flanges on various sheets such as aluminum, stainless, copper, magnesium, and titanium. A short section on shrinking a large dent out of a flat steel sheet is also included.
Shrinking Magic |
|
||
| TMV-0004-D | $40.00 | ||
7 Day Rental - DVD |
|
||
| TMV-0004-R | $9.40 | ||
| |
|||
Those Doggoned Reverses: Fairings, Ducktails and Saddles
We use hand tools, the Air Power Hammer, and the Wheel to make "reverse shaped" parts. Windshield fairings, strut fairings, gearleg fairings, and more are shown in detail.
Those Doggoned Reverses: Fairings, Ducktails and Saddles |
|
||
| TMV-0008-D | $40.00 | ||
7 Day Rental - DVD |
|
||
| TMV-0008-R | $9.40 | ||
| |
|||